More Ethernet Project Details

The current plan is to use a 3Com 3c509B ISA Ethernet card with the hardware that I plan to build and finally give the Color Computer Ethernet capabilities. One advantage of the 509B card is that is has off-loading capabilities in hardware for checksums. The 6809 in the CoCo can use all the help it can get! The other thing about this card is you can purchase them cheap from eBay. At least a year ago you still could...
One site that I have found has some example drivers click here . For a detailed copy of the 3Com 3c509B hardware (zipped PDF) click here. Finally, this site has an IP Stack for use with microcontrollers.

Comments

mattwashington9477 said…
I read over your blog, and i found it inquisitive, you may find My Blog interesting. My blog is just about my day to day life, as a park ranger. So please Click Here To Read My Blog
9:20 AM
eddysmith59196276 said…
This comment has been removed by a blog administrator.
5:19 AM
Post a Comment

Popular posts from this blog

Image
When SALT goes bad While trying out my new CoCo SDC with my Color Computer 3, I found some strange issues.  Symptoms included garbage on the screen while turning on, garbage after hitting reset, computer not initializing with any text.  Any cartridge inserted would cause the system to not display any video. I also noticed something odd, the usual double click of the cassette relay when power was applied was missing.  All I heard was a single click, and pressing the reset button did not generate any clicking of the relay. I tried reseating the GIME, swapping out the memory card for a working 512k board, replacing the electrolytic capacitors over the entire board, and finally looking around for any anomalies that might explain why my Color Computer 3 was not working correctly. The basics troubleshooting I had done to this point had gotten me nowhere, I needed to get out the service manual and a digital meter to see what was actually going on.  My first stop was to make sure that
Read more

WinCupl download and install

Installed and configured latest version of WinCupl from Atmel web site (version 5.30.4). For this project I am going to use the same CPLD part (Atmel ATF1508AS 84 pin PLCC 20ns part). According to the WinCupl fitter tool there are 50 percent of the I/O pins still available and only 20 percent of the internal logic is being used. This should allow for the ISA bus logic to be included in the same part. Here is my latest CPLD code for this project. The link is here . This code does not yet have any ISA bus logic added at this point :)
Read more